This is the first non-IH related post on Bob’s Bad Binder.
Basically this article was on another site, and all automotive items will be moved here. These will probably be rare.
My everyday driver is a 1965 Buick LeSabre with a 300 V8. This is a great engine - I can get over 20 mpg on the highway. One of the modifications I made was to replace the point type distributor with a GM HEI out of a later model Buick 350 V8. The distributor fits correctly, but did require some slight modifications (grinding) to the intake manifold. The power, performance and starting after this modification has been tremendous. I would suggest puting an HEI in any vintage GM product if there is a direct replacement.
Popularity: 63%
Related Articles
3 users responded in this post
hi there bob, this is great info as i was considering doing it 2 my 65 lesabre, but i have a slight problem,it is that i cant work out what size motor is in my 65 lesabre, i have got the heads off , and cant seam 2 find a block no. on it to determine size motor, i am assuming it is a 300 as the boer and stroke size is 3.875 x 3.40 if u have any info on motor specs could u send it please, i am fightoing a loosing battle here in AUSTRALIA, not many of these cars .. down under, i could send u some pics if u like.. just trying to find sum 1 that kno’s abit about these buick beauties… hopefully i will hear from u soon… stevegallacher@gmail.com
Steve,
I’m not sure where to find casting numbers, haven’t had a need to mess with that for a while.
A 64-65 Buick had a 300, a 401 or a 425 for V8 options. If your car hasn’t been modified, it should be one of these, and it should be pretty easy to tell a 300 from a 401. The 340 wasn’t available until 66.
Bore and stroke on a 300 is 3.75 x 3.40. The great thing about an HEI distributor is the 350 Buick version fits a 300 and a 340 without a problem. They all take the same distributor. I think I had to take a grinder to the intake just to get maximum rotation, but the modification was minimal.
I hope this helps. If you have any further questions please feel free to ask. Oddly enough, I have two of these cars and the Buick 300 V8 was the first engine I ever rebuilt, so I do know a bit about them.
I’ll take some pictures of the engine compartment so we can compare and post them. If you want to send me some pics of your ride, I’d love to see them.
Anyone know the recommended gap for points and plugs on the 1972 350? Going to switch to electronic when the parts get here from stateside, but till then….
Leave A Reply
Please Note: Comment moderation maybe active so there is no need to resubmit your comments